ATN PS28-3P Night Vision Clip-On System NVDNPS283P
The ATN PS28 Gen 3 Pinnacle Night Vision Clip-On System is a night vision device that can be attached to a rifle scope or other optic and is designed to assist in low-light/night observing. This PS28 is capable of up to 64-72 lp/mm resolution. The Gen 3 Pinnacle, thin-filmed, auto-gated, gallium arsenide image intensifier transmits a conventional green NVD image, allows you to convert your existing day scope to night vision, and provides excellent target acquisition and aiming capabilities.
See full description
Main information about ATN PS28-3P Night Vision Clip-On System NVDNPS283P
The ATN PS28 Gen 3 Pinnacle Night Vision Clip-On System is a night vision device that can be attached to a rifle scope or other optic and is designed to assist in low-light/night observing. This PS28 is capable of up to 64-72 lp/mm resolution. The Gen 3 Pinnacle, thin-filmed, auto-gated, gallium arsenide image intensifier transmits a conventional green NVD image, allows you to convert your existing day scope to night vision, and provides excellent target acquisition and aiming capabilities. It can be used as a stand-alone night vision device as well while offering the ability to connect it to spotting scopes, binoculars, or monoculars.
The PS28, when attached to a rifle scope, eliminates the requirement of removing your existing day scope from your rifle, to replace it with a dedicated night vision sight (which would also involve re-zeroing). The PS28 simply mounts in front of your own standard day optical sight. This allows the user to maintain consistent eye relief and shooting position.
The PS28 is equipped with a quick-disconnect mounting system which provides the user with an easy and quick way to attach or detach the unit.
- Intensifier Tube Gen 3 Pinnacle Thin-Film/Auto-Gated
- Resolution 64-72 lp/mm
- Signal to Noise Ratio 24 Typical
- Magnification 1x
- Field of View 13°
- Lens 68mm f/1.15
- Exit Pupil Diameter 40 mm
- Range of Focus 32' / 10 m to infinity
- Battery Type Single CR123A (3 V)
- Battery Life 50 hr
- Environmental Rating Waterproof
- Operating Temperature -22.0 to 140.0°F / -30.0 to 60.0°C
- Storage Temperature -58.0 to 140.0°F / -50.0 to 60.0°C
- Dimensions 7.3 x 3.4 x 3.3" / 185.4 x 86.4 x 83.8 mm
- Weight 2.0 lb / 0.9 kg
The U.S. Department of Commerce and the U.S. Department of State, Office of Munitions Control regulates our products. Due to this we kindly request that you read the below paragraphs regarding export regulations.
If you should have any questions or require additional information regarding export regulations please contact our knowledgeable and experienced staff or contact the:
U.S.Department of Commerce
Bureau of Industry and Security
Office of Exporter Services:
PH (202) 482-4811
U.S. Department of State
International Traffic in Arms Regulations
Office of Defense Trade Control:
PH (202) 663 2714
Export of night vision equipment and optical sighting equipment is controlled by the U.S. Department of State Office of Defense Trade Controls, in accordance with International Traffic in Arms (ITAR), Title 22, Code of Federal Regulations Part 120-130 and/or the Export Administration Regulations (EAR) U.S. Department of Commerce.
It is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person, whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.
It is the Resellers/End Users responsibility to request and obtain export licenses for the export of the subject items, and to ensure that the requirements of all applicable laws, regulations and administrative policies are met.
Diversion contrary to U.S. law is prohibited.
Other Restrictions: Restrictions on the use of night vision with a weapon vary from state to state. You are strongly advised to learn these laws and adhere to them. American Technologies Network corp. will not be held responsible for unlawful usage.
NIGHT VISION PRODUCT EXTENDED WARRANTY
This product is guaranteed to be free from manufacturing defects in material and workmanship under normal use for a period of 2 years from the date of purchase. Products that were purchased as factory refurbished, samples or not from an authorized ATN vendor are not be covered by this warranty. In the event a defect that is covered by the foregoing warranty occurs during the applicable period stated above, ATN, at its option, will either repair or replace the product, and such action on the part of ATN shall be the full extent of ATN's liability, and the Customer's sole and exclusive remedy. This warranty does not cover a product (a) used in other than its normal and customary manner; (b) subjected to misuse; (c) subjected to alterations, modifications or repairs by the Customer of by any party other than ATN without prior written consent of ATN; (d) special order or "close-out" merchandise or merchandise sold "as-is" by either ATN or the ATN dealer; or (e) merchandise that has been discontinued by the manufacturer and either parts or replacement units are not available due to reasons beyond the control of ATN. ATN shall not be responsible for any defects or damage that in ATN's opinion is a result from the mishandling, abuse, misuse, improper storage or improper operation, including use in conjunction with equipment which is electrically or mechanically incompatible with or of inferior quality to the product, as well as failure to maintain the environmental conditions specified by the manufacturer. CUSTOMER IS HEREBY NOTIFIED THAT OPERATION OF THE EQUIPMENT DURING DAYLIGHT HOURS OR UNDER ANY EXCESSIVE LIGHT CONDITIONS MAY PERMANENTLY DAMAGE THE INTERNAL COMPONENTS OF THE UNIT AND SAID DAMAGE WILL NOT BE COVERED UNDER THIS WARRANTY. This warranty is extended only to the original purchaser. Any breach of this warranty shall be waived unless the customer notifies ATN at the address noted below within the applicable warranty period. The customer understands and agrees that except for the foregoing warranty, no other warranties written or oral, statutory, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose, shall apply to the product. All such implied warranties are hereby and expressly disclaimed.
LIMITATION OF LIABILITY
ATN will not be liable for any claims, actions, suits, proceedings, costs, expenses, damages or liabilities arising out of the use of this product. Operation and use of the product are the sole responsibility of the Customer. ATN's sole undertaking is limited to providing the products and services outlined herein in accordance with the terms and conditions of this Agreement. The provision of products sold and services performed by ATN to the Customer shall not be interpreted, construed or regarded, either expressly or implied, as being for the benefit of or creating any obligation toward any third party of legal entity outside ATN and the Customer; ATN's obligations under this Agreement extend solely to the Customer. ATN's liability hereunder for damages, regardless of the form or action, shall not exceed the fees or other charges paid to ATN by the customer or customer's dealer. ATN shall not, in any event, be liable for special, indirect, incidental or consequential damages, including, but not limited to, lost income, lost revenue or lost profit, whether such damages were foreseeable or not at the time of purchase, and whether or not such damages arise out of a breach of warranty, a breach of agreement, negligence, strict liability or any other theory of liability.
PRODUCT WARRANTY REGISTRATION
In order to validate the warranty on your product, ATN must receive a completed Product Warranty Registration Card for each unit or each unit must be registered online at ATN Warranty Information. Online is preferred method of registration. Please complete the form above and/or mail registration card immediately to our Service Center: ATN Corporation, 1341 San Mateo Ave., South San Francisco C A 94080. Products qualifying for warranty repair will be either repaired or replaced within 10 business days of receipt of merchandise unless the customer is notified otherwise.
OBTAINING WARRANTY SERVICE
To obtain warranty service on your unit, End-user must notify ATN service department by calling 800-910-2862 or 650-989-5100 to receive a Return Merchandise Authorization number (RMA).
When returning please take or send the product, postage paid, with a copy of your sales receipt to our service center, ATN Corporation at the address noted above. All merchandise must be fully insured with the correct postage; ATN will not be responsible for improper postage or, missing or damaged merchandise during shipment.
When sending product back, please clearly mark the RMA# on the outside of the shipping box. Please include a letter that indicates your RMA#, Name, Return Address, reason for service return, Contact information such as valid telephone numbers and/or e-mail address and proof of purchases that will help us to establish the valid start date of the warranty. Product merchandise returns that do not have an RMA listed may be refused or a significant delay in processing may occur.
Estimated Warranty service time is 10-20 business days. End-user/customer is responsible for postage to ATN for warranty service. ATN will cover return postage/shipping to continental USA end-users/customers after warranty repair only if product is covered by aforementioned warranty. ATN will return product after warranty service by domestic UPS ground and/or domestic mail. Any other requested, required or international shipping method the postage/shipping fee will be the responsibility of the end-user/customer.
Please Note! Certain products can only be shipped within the United States, due to supplier agreements and export rules and regulations.
Product's SKU: NVDNPS283P
Product's UPC: 658175906063
ATN PS28-3P Night Vision Clip-On System NVDNPS283P
ATN (American Technologies Network) is the leader of American Optics Industry in manufacturing of various equipment for Daytime and Dark time use. The company has a great experience in providing Night Vision, Thermal Imaging, Smart HD, and White Phosphor technologies. Outdoors Bay proposes the best Scopes, Binoculars and Goggles, Monoculars, Range Finders, and Accessories made by ATN. And we provide the most suitable conditions for every customer of this excellently designed and quite effective optics.Know more about ATN (American Technologies Network)
Product reviews - ATN PS28-3P Night Vision Clip-On System NVDNPS283P
Reviews are loading, please wait...
Loading, please wait...